RÉGLAGE YZ 490
Sujet
bonsoir je recherche les dimensions des gicleurs pour une yz 490 de 1984 merci d'avance 😀
Moto(s) : imf 420
Vu sur le net , à vérifier 😉
470 Main
AA-0 Nozzle, Series 224
7DH3 Needle, clip in position 3
40 pilot
1 1/2 turns out (will vary with weather conditions)
3.0 Slide
470 Main
AA-0 Nozzle, Series 224
7DH3 Needle, clip in position 3
40 pilot
1 1/2 turns out (will vary with weather conditions)
3.0 Slide
Moto(s) : 125 RM 83/84+125 dtmx +honda250CR79/89+400 XR
réglages 83
440 Main (stock)
R-0 needle jet series 247 (richer than the stock Q-8 )
6F8 Needle, clip in position 3 (leaner on bottom than stock needle)
40 pilot
carb slide mod to 3.5mm cutaway
440 Main (stock)
R-0 needle jet series 247 (richer than the stock Q-8 )
6F8 Needle, clip in position 3 (leaner on bottom than stock needle)
40 pilot
carb slide mod to 3.5mm cutaway
Moto(s) : 125 RM 83/84+125 dtmx +honda250CR79/89+400 XR
Ce sujet ne contient pas encore d'image
Ce sujet ne contient pas encore de vidéo
