j'espère pour toi que la pompe à eau n'est pas décalé d'un carter à l'autre c'est prendre le risque d'un achat pour rien surtout que le carter du 85 existe en alu maintenant . hjs

Celui ci est en alu.

And here is even BETTER news, the 1989 water pump cover is ALUMINUM!!! No more 
corrosion! 

Yes there are some additional parts you need to get. 

Here is how it breaks down: 

1981 water pump cover will fit a 1982 and 1983. 1981 cover is aluminum, 1982 
through 1988 are made of magnesium. 

1984 is a "one off" water pump cover. 

1985 through 1989 use virtually the same water pump cover. I know for a fact 
that a 1989 water pump cover WILL work on a 1988,1987 and 1986 CR250. A 1987 cover 
will fit a 1986 and 1985. Therefore the 1989 cover WILL work on the 
1988,87,86,85 CR250. 

I have confirmed with the mechanic I have been working with that the 1989 
CR250 water pump cover part number 11340-KS7-831 WILL FIT the 1985, 1986, 1987, 
1988 And of course the 1989 CR250's!!! 

YOU WILL need to also order part number 90084-KF9-900 (alternator cap cover) and 
part number 91303-377-000 (o ring for alternator cap) and 11342-KS7-701 (clutch 
cover (Honda no longer carries this part, you will need to find it on ebay or a 
motorcycle salvage yard) and the clutch cover o ring part number 91311-KS7-701. 

The difference between the 1985/86 from the 1987 water pump cover is the 1987 
water pump cover had a removable clutch cover. 

The difference between the 1989 water pump cover and the 1985, 1986, 1987 water 
pump cover is that there is a minor difference on how you are able to access the 
water pump governor. The 1989 water pump cover is also available from Honda and 
it is made from ALUMINUM! 

The 1981 CR250 water pump covers (which are made from aluminum) will fit the 
1982 and 1983 CR250's. 

To sum up. 
If you have a 1985, 1986, 1987, 1988 Honda CR250 with a bad water pump cover, 
you can order directly from Honda an aluminum water pump cover from a 1989 Honda 
CR250. 
You will also need to get a clutch cover if you have a 1985/86 CR250, which you 
need to find used and the alternator cap cover and ring and of course the water 
pump gasket (part number 11395-KS7-306), you will also need to get the plastic oil filler plug from the 1989 cover. 

The "orphan" water pump cover is the 1984 CR250, it apparently is a "one year 
only" water pump cover. 

pour avoir le moins de modification regarde chez eux.
www.crclutchcovers.com/

Salut si tu on carter ne va pas ça peut m'intéresser  🙂

T'inquiète ça va aller!!!!

J'espère pour toi en même temps ce n'est que des prévisions vu que le mien est bon! Mais pour combien de temps ?

Quelques nouvelles pièces reçus

Peinture moteur

Montage a blanc , un bijoux